Home ADSL Routers WH-NR-5502N

Whitebox wireless router 5502N



product_description

Whitebox WH-NR-5502N, 802.11n 300M Wireless Router, 8M flash,32M RAM,support DD-WRT.

WH-NR-5502N is an IEEE 802.11n 2T2R 300Mbps Wireless ADSL2/2+ Router combines a “Always-On” high speed Asymmetric Digital Subscriber Line (ADSL) connection to the Telephone Line, and four 10/100BASE-T Ethernet port connection to a host PC or other Ethernet device to enable the widest array of host connectivity. It is with USB 2.0 host interface to allow for an external USB HDD a local network.

    Features
  • Compliant to the most updated ADSL2/2+ standards
  • Support ADSL2+ downstream data rate of up to 24Mbps
  • ATM Layer with Traffic Shaping QoS support
  • Built-in Quick Setup Wizard to easily establish ADSL connection
  • USB 2.0 Host Interface allows for an external Hard Disc Drive
  • IEEE 802.11n 2T2R WLAN supports up to 300Mbps/300Mbps
    rate
  • Support WEP, WPA, WPA2 and 802.1X based Encryption
  • Built-in 4 Ports 10/100Mbps Ethernet Switch
  • Support UPnP specification
  • Support VLAN / MSSID functionality
  • Hardware Reset button for fast default setting recovery
  • Web-based Management, Configuration and Firmware Upgrade
  • Support WPS feature
    ADSL
  • ANSI T1.413 i2, G.992.1 and G.992.2 ADSL standard compliant
  • G.992.3 and G.992.5 ADSL2 and ADSL2+ standard compliant
  • Downstream/Upstream data rate up to 24Mbps/1Mbps
    ATM
  • Support up to 8 distinct PVCs
  • Support VC and LLC Multiplexing
  • Support UBR, CBR, VBR-rt and VBR-nrt Traffic Shaping QoS
  • Support ATM AAL5 adaptation functionality
    WIRELESS
  • IEEE 802.11b/g/n standards compliant
  • Support data rates up to 300Mbps ( Auto-Rate Capable )
  • Support WEP/WPA/WPA2/802.1X Encryption for data security
  • Support WDS and WPS
  • Support Multi BSSID ( up to 4 MBSSIDs)
    ETHERNET INTERFACE
  • 4 Port Switch Interface compliant with IEEE 802.3x standards
  • Automatic MDI/MDIX crossover for 10/100 Base-T port
  • Auto-negotiation and speed-auto-sensing support
  • Support VLAN functionality
    BRIDGING/ROUTING
  • RFC2684 (RFC1483) – Bridged/Routed
  • RFC2364 – PPPoA
  • RFC2516 – PPPoE
  • Support IEEE 802.1d Transparent Bridging
  • NAT with extensive ALGs support
  • Support Static Route
  • Support RIP v1 and v2
  • Support DHCP Server/Client/Relay
  • Support DNS Proxy
  • Support IGMP Proxy
  • Support Port Mapping/Forwarding
  • Support IPQoS
    SECURITY
  • Support IP Filtering
  • Support Port Filtering
  • Support DMZ
  • Support MAC/Bridge Filtering
  • Support URL Blocking
  • Embedded firewall functionality
    NETWORK MANAGEMENT
  • Web-based Control/Management
  • Remote Access Control
  • Remote Telnet
  • SNMP v2
  • Firmware upgrade via HTTP/TFTP/FTP
  • Built-in diagnostic function
  • System Log
  • TR-069
    USB
  • File Server via SMB
  • support FAT,FAT32,NTFS,EXT2 and EXT3 file system
  • One RJ-11 ADSL Connector
  • Four RJ-45 LAN Connector
  • One Reset Button for factory default setting recovery
  • One WPS Button
  • One Power adaptor connector
  • Two fixed 2.4GHz Antenna
  • Status LED Indicator
  • USB 2.0 Host
  • FCC Part 15 , CE , EN60950 (LVD) and K.21(Optional)
  • RoHS / WEEE compliance
  • Dimension: 163mm (L) X 113mm (W) X 28 mm (H)
  • Weight : 300 grams
  • PTI-8511NU – 4 Ports 11n Wireless ADSL2/2+ Router
    ENVIRONMENTAL
  • Operating Temperature: 5 ? ~ 45 ? Ambient
  • Humidity: 5% ~ 95% RH (non-condensing)
  • Storage Temperature: -20 ? ~ 60 ?
    Transmit Power
  • 17 dBm typically @ 802.11b
  • 15 dBm typically @ 802.11g
  • 13 dBm typically @ 802.11n