Whitebox H1004S is a single fiber version "triple-play" Optical Network Unit (ONU) that provides an ideal solution for economical delivery of telephone, data, and CATV analog signals or a combination of analog and digital channels, including HDTV broadcast, over single single-mode fiber to the user's premises in fiber-to-the-home (FTTH) applications.
Whitebox H1004S combines the latest advancements in fiber optic and chip technologies with feature-rich network management controls to give the most advanced, yet affordable fiber-to-the-home solution. It integrates one 100Base-BX10 WAN port with de-multiplexed CATV optical signal function, one CATV coaxial-cable output port, and four 10/100Base-TX LAN ports for direct connection of up to four computers and two telephony ports to provide telephone services. The functions of the OnAccessH1004S Ethernet switch permit all the connected computers / terminals to be able to communicate with each other and to share with each other the internet, the resources and files, such as music, digital pictures, and other documents within the user's premises. All the computers can also share a printer which is connected anywhere in the house. Whitebox H1004S makes it possible to play head-to-head computer games freely within the household or against Internet opponents at a speed of 100 times faster than ADSL.
One 100Base-BX10 single single-mode fiber network port with CATV overlay
Four 10/100Base-TX Half/Full duplex switch ports
2048 MAC address table (4-way hashing)
6KX64 bits packet buffers are divided into 192 blocks of 256 bytes each
Four queues for QOS (1:2 or 1:4 or 1:8 or 1:16)
Priority features by Port-Based, 802.1p, IP TOS, Diffserv, TCP/UDP Port Application-Based of packets
Store & forward architecture and performs forwarding and filtering at non-blocking full wire speed
An aging function and 802.3x flow control for full duplex and a backpressure function for half duplex
Packet lengths up to 1518/1522 (Default)/1536/1784 bytes in maximum
Scalable Per Port Bandwidth Control (Both Ingress and Egress)
Congestion Flow Control (HOL)
Port-based VLAN and 802.1Q VLAN. Up to 16 VLAN groups are implemented by full 12 bits VID matching
Easy Management 32-bit smart counter for per port RX/TX byte/packet count, 16-bit smart counter for per port ERROR count and Collision count
32 hardware IGMP Table (Multicast Table)
MAC Address Table is accessible
Supports 802.1x security function
Supports 802.1d Spanning Tree Protocol
Broadcast/Multicast Storm Suppression
One or two POTS ports to provide VoIP telephony service
Wide 40 MHz ~ 870 MHz bandwidth supports CATV analog channels or a combination of analog and digital channels including HDTV broadcast
Excellent RF frequency and distortion characteristics for high linearity
Internal proprietary impedance match circuitry with one 75 Ohm coaxial-cable output port
High sensitivity of 75 or 90 dBuV RF output at -3dBm optical input.
Port Configuration
One 100Base-BX10 WAN port with CATV optical signal overlay
Four 10/100Base-TX LAN ports.
Two POTS telephony (FXS) ports or one POTS (FXS) plus one PSTN telephony (FXO) ports.
One 75 Ohm coaxial-cable CATV port with RF bandwidth of 45~860MHz or 45~1000MHz.
Optical Interface
100Base-BX10 WAN port: Single single-mode fiber, dual wavelength (1550nm for CATV and 1310nm for Ethernet data), FC/APC connector, operating distance 15km.
CATV Specifications
One 75 Ohm coaxial-cable CATV output port
RF bandwidth of 45~860MHz or 45-1000MHz
75 or 90 dBuV RF output at -3dBm optical input
CNR>=51dB
CSO<-65dBc
CTB<-65dBc
Physical Environmental and Electrical
Dimensions: 240mmx160mmx43mm.
Weight: 1.25Kg
Operating temperature: 0 C ~ 50 C
Storage temperature: -25 C ~ 85 C
Humidity: 5% ~ 95% RH Non-condensing.
Power supply: DC12V or AC15-18V using external adaptor
fttx-products 
Whitebox.me Product Feed