Home PoE Switches wh-poe-3082

Whitebox PoE Switch 3082



product_description

WH-POE-3082 is managed Redundant Ring Ethernet switch with 8x10/100Base-T(X) ports with PoE (PSE) function

and 2xGigabit combo ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time

< 10ms over 250 units of connection), Open-Ring, O-RSTP and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect

your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery

technology. WH-POE-3082 also support Power over Ethernet, a system to transmit electrical power, along with

data, to remote devices over standard twisted-pair cable in an Ethernet network. Each WH-POE-3082 switch has

8X10/100Base-T(X) PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will

provide power in a PoE setup. WH-POE-3082 support new DDM (Digital Diagnostic Monitoring) function, which

can monitor instantly the status of electronic voltage, current and temperature. All function of WH-POE-3082 can

be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide

operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is

one of the most reliable choice for highly-managed and Fiber Ethernet application with PoE function.

  • Ethernet standards
    • IEEE 802.3 for 10Base-T
    • IEEE 802.3u for 100Base-T(X) and 100BaseFX
    • IEEE 802.3z for 1000Base-X
    • IEEE 802.3ab for 1000Base-T(X)
    • IEEE 802.3x for Flow control
    • IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
    • IEEE 802.1D for STP (Spanning Tree Protocol)
    • IEEE 802.1p for COS (Class of Service)
    • IEEE 802.1Q for VLAN Tagging
    • IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
    • IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
    • IEEE 802.1x for Authentication
    • IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
    • IEEE 802.3af PoE specification (up to 15.4 Watts per port for PSE)
  • MAC Table
    • 8192 MAC addresses
  • Priority Queues
    • 4
  • Processing
    • Store-and-Forward
  • Switch Properties
    • Switching latency: 7 us
    • Switching bandwidth: 5.6Gbps
    • Max. Number of Available VLANs: 4096
    • IGMP multicast groups: 1024
    • Port rate limiting: User Define
  • Security Features
    • Enable/disable ports, MAC based port security
    • Port based network access control (802.1x)
    • VLAN (802.1Q ) to segregate and secure network traffic
    • Radius centralized password management
    • SNMPv3 encrypted authentication and access security
  • Software Features
    • STP/RSTP/MSTP (IEEE 802.1D/w/s)
    • Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
    • TOS/Diffserv supported
    • Quality of Service (802.1p) for real-time traffic
    • VLAN (802.1Q) with VLAN tagging and GVRP supported
    • IGMP Snooping for multicast filtering
    • Port configuration, status, statistics, monitoring, security
  • Network Redundancy
    • Open-Ring
    • O-RSTP
    • STP
    • RSTP
    • MSTP
  • DDM Function
    • Voltage / Current / Temperature
  • RS-232 Serial Console Port
    • RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1
  • LED Indicators
    • Power /PoE Indicator Green : Power LED x 3, Green : PoE LED x 8
    • R.M. Indicator Green : indicate system operated in O-Ring mode
    • Fault Indicator Amber : Indicate excepted event occurred
    • 10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for Duplex/Collision
    • 10/100/1000Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for 100Mbps indicator
    • 1000Base-X / Fiber Port Indicator Green for port Link/Act.
  • Fault contact
    • Relay Relay output to carry capacity of 1A at 24VDC
  • Power
    • Redundant Input Power Dual DC inputs. 48VDC on 6-pin terminal block
    • Power Consumption (Typ.) 9 Watts (Power consumption of PSE not included)
    • Overload Current Protection Present
    • Reverse Polarity Protection Not Presented
  • Physical Characteristic
    • Enclosure IP-30
    • Dimension (W x D x H) 74.3(W)x109.2(D)x153.6(H) mm ( 2.93 x 4.3 x 6.05 inch.)
    • Weight (g) 1100 g
  • Environmental
    • Storage Temperature -40 to 85°C (-40 to 185°F)
    • Operating Temperature -40 to 70°C (-40 to 158°F)
    • Operating Humidity 5% to 95% Non-condensing
  • Regulatory approvals
    • EMI FCC Part 15, CISPR (EN55022) class A
    • EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11
    • Shock IEC60068-2-27
    • Free Fall IEC60068-2-32
    • Vibration IEC60068-2-6
    • Safety EN60950
    • Warranty 5 years